産品介紹
Basic Parameters
Type Android Industrial Printer Handheld Terminal
CPU Quad-Core ARM Cortex A7 1.3GHz
Graphics Processor Mali760-MP2
Memory 2G LPDDR2 RAM+16G EMMC ROM
OS Android 5.1
Color Black
Display 5'' high-resolution Multi-touch screen; Resolution: 1280*720 dpi
support 5 point finger touch and 3 tangible key
Fingerprint sensor Sensor: FPC1020F1; Processor: FPC2020Q1 (64 pin QFN 9 * 9 mm)
Thermal printer 2'' 384 point thermal printer, velocity:15mm/s
Input Method Handwriting、Stroke、Pinyin input method
Communication GSM/WCDMA/FDD/TDS/TDD;
GSM Quad Band, TDS B34/39, WCDMA B1/2/5/8, TDD B38/39/40, FDD B1/3/7/8/20
GPS Built-in GPS, support A-GPS, GPS+BDS, Meter Level Localization
Port Micro USB2.0, support OTG
Memory Interface Micro SD card; expansion: 2G to 32G
Bluetooth Bluetooth 4.0+EDR
Speaker Single speaker、8±15% ohm
WLAN Support 2.4G+5G, Support 802.11a/b/g/n mode and
WEP/WPA/WPA2-PSK/AES/WAPI PSK/802.1*EAP Encryption protocol
Camera 8.0 Mega Pixel rear camera; 2.0 Mega Pixel front camera; Auto focus; with LED light
Battery Li-Polymer 4000mAh
Standby Time One week
Duration 8 hours ( full function )
IOT Functions（RFID, Barcode）
IOT Barcode 1D Laser Barcode Scanner、2D Barcode Scanner (optional)
1D Barcode Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E,Codebar, I nterleaved 2 of 5, China post 25, ISBN/ISSN, Code93, UCC/EAN-128, GS1 Databar, HIBC etc.
2D Barcode 2D Barcode Scanner, Support both 1D and 2D, Chinese sensible code (optional)
IOT RFID Fully support NFC. Support 14443A/B、15693 Protocol, Reading Distance 2cm~5cm, reading position, battery cover.
Optional: Build-in UHF RFID, support EPC C1/G2、18000-6C reading and writing tags
Optional: 2.4G active RFID module, reading distance can reach 30~50m
Working Conditions
Operation Temperature -25 ~ 65 ℃
Storage Temperature -30 ~ 70 ℃
Humidity 0 ~ 95%
Product Features
Gravity Sensor Support Light Sensor Support Distance Sensor Support
Microphone Support Receiver Support Vibrator Support
Accessories
